Article ID: 1448, created on Oct 6, 2008, last review on May 9, 2014

  • Applies to:
  • Virtuozzo containers

Resolution

1.  Mount issued VE.

2. Open the following registry key: HKEY_LOCAL_MACHINE\vz%VEID%\MACHINE\SYSTEM\CurrentControlSet\Services

3. Check its subkeys and correct them like it’s showed in the scheme below. Please check VE GUID before start

[HKEY_LOCAL_MACHINE\vzVEID\MACHINE\SYSTEM\CurrentControlSet\Services\GUID\Parameters\Tcpip] “EnableDHCP"=dword:00000000

[HKEY_LOCAL_MACHINE\vzVEID\MACHINE\SYSTEM\CurrentControlSet\Services\lanmanserver\Linkage]
"Bind"=multi_sz: \Device\NetbiosSmb \Device\NetBT_Tcpip_GUID
"Export"= multi_sz: \Device\LanmanServer_NetbiosSmb \Device\LanmanServer_NetBT_Tcpip_GUID
"Route"= multi_sz: "NetbiosSmb" "NetBT" "Tcpip" "GUID"

[HKEY_LOCAL_MACHINE\vzVEID\MACHINE\SYSTEM\CurrentControlSet\Services\lanmanworkstation\Linkage] "Bind"=multi_sz: \Device\NetbiosSmb \Device\NetBT_Tcpip_GUID
"Export"= multi_sz: \Device\LanmanWorkstation_NetbiosSmb \Device\LanmanWorkstation_NetBT_Tcpip_GUID
"Route"= multi_sz: "NetbiosSmb" "NetBT" "Tcpip"
 
"GUID" [HKEY_LOCAL_MACHINE\vzVEID\MACHINE\SYSTEM\CurrentControlSet\Services\NetBIOS\Linkage] "Bind"=multi_sz: \Device\NetBT_Tcpip_GUID
"Export"= multi_sz: \Device\NetBIOS_NetBT_Tcpip_GUID
"Route"= multi_sz: "NetBT" "Tcpip"
 
"GUID" [HKEY_LOCAL_MACHINE\vzVEID\MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Linkage] "Bind"=multi_sz: \Device\Tcpip_GUID
"Export"= multi_sz: \Device\NetBT_Tcpip_GUID
"Route"= multi_sz: "Tcpip"
 
"GUID" [HKEY_LOCAL_MACHINE\vzVEID\MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parameters\Interfaces\Tcpip_GUID] "NameServerList"= multi_sz:””

[HKEY_LOCAL_MACHINE\vzVEID\MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Linkage] "Bind"=multi_sz: \Device\GUID
"Export"= multi_sz: \Device\Tcpip_GUID
"Route"= multi_sz: GUID

[HKEY_LOCAL_MACHINE\vzVEID\MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Adapters\GUID]
"IpConfig"= Tcpip\Parameters\Interfaces\GUID
"LLInterface"=

[HKEY_LOCAL_MACHINE\vzVEID\MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\GUID]
"EnableDHCP"=dword:00000000 Unmount and start the VE’s

d02f9caf3e11b191a38179103495106f 2897d76d56d2010f4e3a28f864d69223

Email subscription for changes to this article
Save as PDF