Article ID: 6974, created on Dec 7, 2009, last review on Aug 12, 2014

  • Applies to:
  • Virtuozzo containers for Windows 4.5


1. Install Microsoft Network Monitor on the hardware node (do not run it after installation)
2. Open c:\windows\inf\netnm3.inf using Notepad
3. Find the following string: HKR, Ndi,FilterType,0x00010001,0x00000001
4. Replace the last value from 0x00000001 to 0x00000002
5. Save and close the file
6. Open Control Panel, Network and Sharing Center, Manage network connections
7. Open network adapter properties (you can open any adapter, no needs to perform steps listed below for every adapter)
8. Click “Install…” button
9. Select “Service” and click “Add…” button
10. Click “Have Disk…” button
11. Type “c:\windows\inf” and click “Ok”
12. Select Manufacturer as “Microsoft” and Network Service as “Microsoft Network Monitor 3 Driver” (the driver is not signed, because we changed inf file). Click “Ok”
13. Close network adapter properties (click “Close”)
14. Run cmd and execute the following commands:
            net stop nm3
            net start nm3
15. Open Network Monitor, now you can capture traffic to/from containers.

Alternatively you can take netnm3.inf and replace the original file in c:\windows\inf. Then start from the step 6.


d09cb2230ee0cfa720ed0f2a3cc39452 d02f9caf3e11b191a38179103495106f 965b49118115a610e93635d21c5694a8 2897d76d56d2010f4e3a28f864d69223

Email subscription for changes to this article
Save as PDF